HVAC Romney WV

I replaced an old oil furnace with a new one.

Oil furnace replacement

hvac maintenance

I worked on a Goodman GMS8 gas furnace that wasn't igniting properly. Upon inspection, I found the flame sensor was dirty, causing the issue. I cleaned the flame sensor, checked the igniter, and tested the limit switch to ensure safe operation. After testing the thermostat and ensuring proper airflow, the system is now running smoothly. The homeowner can expect efficient heating throughout the winter with this repair.

Today, I repaired a Lennox Elite gas furnace in Romney that was not heating properly. I found a faulty igniter and replaced it with a new one. I also checked the heat exchanger for cracks and cleaned the burner assembly. After testing, the furnace is now functioning correctly and efficiently for the season.

The system was diagnosed with a faulty capacitor and weak blower motor. Using a Fluke multimeter, I confirmed the capacitor was not holding a charge, which affected the blower operation. After replacing both the capacitor and blower motor with OEM parts, the system was tested for proper airflow and cooling efficiency, ensuring optimal performance.

A Goodman GSX16 unit was reported with water leaking from the indoor air handler. Upon inspection, I found the condensate drain line clogged with debris, causing overflow. Using a wet/dry vacuum, I cleared the blockage and flushed the line to ensure proper drainage. I also checked the evaporator coil for dirt buildup and cleaned it to prevent further issues. After testing, the system resumed normal operation without any water leakage, and the Goodman unit is now working efficiently.

In Romney, WV, we completed an HVAC repair for a Lennox XC21 air conditioning unit that was struggling to cool. The issue was traced to a malfunctioning TXV (thermal expansion valve) and a low refrigerant charge. We replaced the faulty TXV with a new Lennox 10C81 valve and recharged the system with R-410A refrigerant. After the repair, we conducted a thorough performance test to ensure the unit was cooling efficiently and operating at peak performance. This ensures reliable and efficient cooling for the home.

Performed an AC repair focusing on the blower motor. The homeowner reported the system was not circulating air properly. Inspected the unit and found the blower motor was malfunctioning due to worn bearings. Replaced the defective blower motor with a new 1/2 HP, 1075 RPM motor. Verified all electrical connections were secure and the motor was properly aligned. Tested the system to ensure the blower was operating correctly and providing adequate airflow. Also checked the capacitor and ensured it was within the manufacturer’s specifications. Advised the homeowner on regular maintenance to extend the lifespan of the new motor and improve system efficiency.

Hvac system replacement

Conducted comprehensive maintenance on a Trane XR16 air conditioning unit. The service included cleaning both the evaporator and condenser coils to improve efficiency and heat exchange. I checked and adjusted the refrigerant levels to ensure they were within optimal range for peak performance. The air filters were replaced with new high-efficiency models to enhance air quality. All electrical connections were inspected and tightened. Finally, I ran a complete system test to verify that the unit was operating smoothly and efficiently.

Today, I tackled an HVAC repair on a Goodman system that was failing to cool effectively. Upon inspection, I discovered a faulty compressor and a significant refrigerant leak. After safely recovering the existing refrigerant, I replaced the compressor and repaired the leak in the line set. I then vacuumed the system to remove any moisture and recharged it with R-410A refrigerant to manufacturer-specified levels. The electrical connections were also checked and tightened. After reassembly, I tested the system to ensure it was operating efficiently and effectively.

I executed detailed maintenance on a Rheem Classic Series HVAC system. This included replacing the air filter with a Rheem Standard Pleated Filter, cleaning both the evaporator and condenser coils with a non-corrosive cleaner, and verifying the refrigerant charge against the manufacturer's specifications. Electrical connections and the thermostat's functionality were also inspected and tested to ensure the system's reliability and efficiency.

I conducted a repair on a Trane XR14 Heat Pump. The procedure involved identifying and fixing a malfunctioning blower motor (model MOT08803), followed by recharging the system with R-410A refrigerant due to low levels detected during diagnostics. After these repairs, I thoroughly tested the system to ensure it was operating efficiently, providing optimal heating and cooling performance.

Completed a repair on an HVAC system featuring a Rheem Classic air conditioner. Diagnosed an issue with the capacitor and promptly fixed it. Ensured the system's coils were clean and airflow unobstructed, confirming efficient operation post-repair. All electrical connections were checked and secured, guaranteeing reliability and optimal cooling performance moving forward.

Hvac repair

In Romney, West Virginia, a service call was initiated for a Trane XV80 heater due to a "No heat" issue. Upon inspection, I identified a faulty ignitor causing the problem. I replaced the ignitor with a new one, ensuring proper functionality. As a result, the heating system is now operational, providing the desired warmth to the premises.

Hvac repair

Hvac repair

HVAC repair on a BlueRidge 14.7 SEER2 Split System for a valued customer today. They were encountering a common issue – reduced efficiency in air handlers. The culprit was a clogged coil hindering proper heat transfer and circulation. I performed thorough coil cleaning to restore optimal performance and comfort.

Effectively resolved a winter heating challenge in Keyser, WV, by fixing a malfunctioning thermostat in the HVAC unit. I solved the issue by replacing the problematic component. Rigorous tests were done to guarantee the thermostat's proper functionality, ensuring the homeowner now enjoys consistent and efficient heating.

No heat service call